آہ مولانا عبدالسلام قدوائی!
آنکھیں اشکبار ہیں، دل اندوہ و غم کا جوئبار ہے، جب یہ قلم فگار ہوکر لکھ رہا ہے کہ مولانا عبداسلام قدوائی جو دارالمصنفین کی علمی اور نجی مجلسوں کی رونق، عزت اور آبرو تھے، ہم سب کو چھوڑ کر یکایک آغوش رحمت الٰہی میں چلے گئے۔
وہ ۱۹۷۵ء میں دارالمصنفین اس وقت آئے جب جناب شاہ معین الدین احمد ندوی سابق ناظم دارالمصنفین کی رحلت سے یہاں کا پتہ پتہ، بوٹا بوٹا سوگوار اور بے رونق ہورہا تھا، وہ یہاں آئے تو اپنے جلو میں علامہ شبلیؒ کی بے پناہ عظمت، اپنے استاد مولانا سید سلیمان ندویؒ کی غیر معمولی عقیدت، جناب شاہ معین الدین احمد ندوی مرحوم کی شخصیت سے اپنی مخلصانہ محبت اور خود اپنی ذات کی لینت، مروت اور ملاطفت کا لشکر ساتھ لائے اور اس راقم سے ایسے گھل مل گئے کہ ہم دونوں کے درمیان شیروشہد کی کوثر بہتی نظر آنے لگی، ان کی آمد سے دارالمصنفین کی سرگرمیوں میں شادابی، اس کی امیدوں کے پھولوں میں رعنائی اور اس کی تمناؤں کے مرغزاروں میں دل فریبی پیدا ہونے لگی، مگر معلوم نہیں مصلحتِ خداوندی کیا تھی کہ دارالمصنفین کے رفقاء ان کی علمی بصیرت اور بزرگانہ الفت سے ہر طرح کا استفادہ کررہے تھے کہ وہ اچانک دائمی طور پر ان سے جدا ہوگئے، وہ ۲۷؍ رمضان المبارک کو تراویح پڑھ کر اور تہجد اور فجر کی نماز ادا کرکے چار بجے صبح اعظم گڑھ سے اپنے وطن تُھلنیڈی ضلع رائے بریلی عید منانے روانہ ہوئے، وہاں پہنچنے کے دوسرے روز سحری کے وقت اٹھے، یکایک بیہوش ہوئے اور جمعہ کے روز گیارہ بجے دن کو اﷲ کو پیارے ہوگئے، دوسرے دن عید کی نماز کے بعد ان کی طالب علمی کے محبوب اور شفیق ترین ساتھی اور اسلامی ممالک کے فاضل اجل مولانا سیدابوالحسن علی...
Kabupaten Pasaman Barat berada di Proponsi Sumatera Barat, ibu kota-nya adalah di Simpang Ampek. Potensi kawasan Simpang Ampek ini merupakan kawasan strategis sebagai pusat pemerintahan, pusat pertumbuhan ekonomi dan sosial budaya masyarakat Pasaman Barat, jika pertumbuhan semua sektor ini tidak berdasarkan Rencana Tata Bangunan dan Lingkungan yang sudah di rencanakan maka akan berdampak negatif di segala bidang. Di Kawasan Pemerintahan ini terdapat Peruntukan lahan Sebagai Ruang Terbuka Hijau berada pada zona II di kawasan Pemerintahan Pasaman Barat Padang Tujuh. Perencanaan Ruang Terbuka Hijau untuk publik seharusnya mengacu kepada kelestarian Lingkungan alam. Tujuan dari penelitian ini adalah untuk menemukan konsep rancangan ekopark dan ekowisata untuk menunjang kelestarian alam. Metode yang digunakan adalah dengan metode deskriptif kualitatif yang menganalisa studi lapangan maupun literatur, dengan cara mengidentifikasikan masalah-masalah yang ada di lokasi penelitian atau site dan sekitar site sehingga mendapatkan hasil dari pemecahan masalah, untuk menemukan sebuah Konsep Rancangan Ekopark dan Ekowisata pada Peruntukan lahan Ruang Terbuka Hijau.
The effect of three variables on ductile iron has been investigated in this study. The first variable was the effect of austempering time on ductile iron. The second variable was the effect of austenitizing temperature and the third major variable was the effect of alloying additions on ductile iron. The alloying elements selected for this purpose were copper, nickel, a combination of copper and nickel and lanthanum. The initial study was conducted on unalloyed ductile iron castings. The effect of austempering time was examined by varying austempering time in the range of 30 minutes to 90 minutes, while keeping austenitization temperature and austempering temperature constant. It was found that with the increase of austempering time, the tensile strength increased significantly. However, at 90 minutes the tensile strength decreased. The optimum temperature was found to be 60 minutes. The second variable was the effect of austenitization temperature on ductile iron. Based on the result of the first experiment, the austempering was carried out for 90 minutes. The austempering temperatures were kept at 270 oC and 370 oC. The austenitization temperature was varied from 850 oC to 925 oC. The study revealed that tensile strength increased at 900 oC but it decreased at 925oC. The third major variable involving the effect of alloying additions on ductile iron, was studied by adding copper with three different values i.e. 0.5 wt. %, 1.0 wt. % and 1.5 wt. %. The fourth melt was without the addition of copper. It was found that with the increase of copper the tensile strength continued to increase up to 1.5 wt. %. The second alloying addition was nickel. One melt was made without nickel while the remaining three melts were made with the addition of 1.0 wt. %, 2.0 wt. % and 3.0% x nickel. The tensile strength increased correspondingly with the increase in the addition of nickel to 3.0 wt. %. The effect of a combination of copper and nickel on ductile iron was also examined. The effect of the last alloying element which was studied was lanthanum. Four melts were made for this study. The first melt was without the addition of lanthanum while the remaining three had 0.006 wt.%, 0.02 wt.% and 0.03 wt.% lanthanum. The results indicated that the tensile strength increased with the increase of lanthanum content with and without austempering. Furthermore, the highest nodule count was obtained with 0.03 wt.% lanthanum while the nodularity remained almost unchanged. Thus, it was observed that the addition of alloying elements results in an increase of tensile strength. The optimum austempering time was 90 minutes and the optimum austenitizing temperature was found to be 900 oC.