Home
Add
Get on Google Play
Home
> Edit
Add/Update Thesis
Title*
Author's Name*
Supervisor's Name
Abstract
The main objectives of this Ph.D. research work are the development of enhanced metal matrix nanocomposite coatings by employing a new technique through gas carburizing of electrodeposited nanocrystalline and amorphous alloy precursors. The carburizing environment was created by introducing a flowing mixture of vaporized 95.5% alcohol (0.25 ml/min, liquid) and argon (0.5 L/min, gas) into the carburizing furnace. Six different alloy coatings namely Ni-W, Co-W, Co-Ni-W, Fe-W and Fe-Ni-W with tailored microstructure obtained by controlling the process parameters like current density, pH and temperature were synthesized. The in-situ carbide formation of binary and/or ternary carbides has been obtained in the bcc/fcc matrices. In Ni-WC composite coatings, WC is formed in the FCC Ni matrix. The size of the carbide particles ranges between 100 and 500 nm. TEM study has revealed the presence of carbide phase in the form of very small precipitates inside the Ni grains, the size of such precipitates is between 10 and 40 nm. The Co-W and Fe-W electrodeposited alloy coatings are not much compact at high deposition current densities, incorporation of Ni increased the adhesion and compactness of the coatings. The carbides of Co-Ni-W composite were needle like that at less carburizing time were at the top surface , while these were present at the depth also with increase in carburizing time as revealed by the section SEM images. Dendritic structure of carbides of Fe3W3C and WC were observed in Fe-W-C carbide composite coatings with the through thickness carbide formation. The hardness of the composite coatings was found to increase with the tungsten content and the carburizing temperature. The maximum hardness of about 1200 KHN is achieved for Fe-Ni-W composite coatings. Supersaturated nature of electrodeposited amorphous and nanocrystalline alloys, in addition to high diffusivity, have been attributed for the formation of carbide phases uniformly distributed in the matrix at a temperature range of 700–850°C. The new technique adopted for the fabrication of metal-matrix composite coatings is based on the idea of being cost effective and the attainment of finer microstructure of the alloy coatings and carbides through electrodeposition and low temperature gas carburizing processes.
Subject/Specialization
Language
Program
Faculty/Department's Name
Institute Name
Univeristy Type
Public
Private
Campus (if any)
Institute Affiliation Inforamtion (if any)
City where institute is located
Province
Country
Degree Starting Year
Degree Completion Year
Year of Viva Voce Exam
Thesis Completion Year
Thesis Status
Completed
Incomplete
Number of Pages
Urdu Keywords
English Keywords
Link
Select Category
Religious Studies
Social Sciences & Humanities
Science
Technology
Any other inforamtion you want to share such as Table of Contents, Conclusion.
Your email address*