معاملة المخطئين والجاهلين في ضوء السيرة النبوية العطرة

Allah Almighty had created man with the instinct to choose between good and evil. It is nature that being a human to be indulged in some activity unconsciously and then to realize and feel sorry for the crime committed. To err is human and to forgive Devine. So sins should not be treated as a single entity for there are of various types, ranging from the small mild ones to the big severe ones, thus dividing people who commit them accordingly. When our father and mother, ate from the forbidden tree, which was wrong, they realized it there and then, and instantly felt pain and remorse and abstained from it and declared repentance with humility and knocked the door of Allah for mercy and forgiveness. Allah the almighty heard their prayers and embraced them in his mercy and forgave their sin, for he is most gracious, and most merciful. Similarly our prophet has set an ideal for treating the sinners, he did not turn his face away from them nor did he declare abandoning them or excommunicating them or even counting them as dirt that should be avoided or looked down upon. He treated them with an open heart and with utmost compassion, sympathy and tolerance, and took them by the hand to the righteous path, his sympathy was always present, a sun that never sets. This article is basically to deal with prophetic examples and virtual self how the Prophet Muhammad (ﷺ) treated the sinners and ignorant. It is suggested that the public and the rulers should be made aware about the with deal to able be would they that so, (صلى الله عليه وسلم) Prophet Holy of teaching sinner and ignorant in an effective manners by following the teaching of. (صلى الله عليه وسلم) Prophet Holy

Ion Implantation and Doping of Rare Earth Metals to Tailor the Multiferroic Properties of Bifeo3

Multiferroic Bismuth ferrite BiFeO3(BFO) is one of the rare compounds which gained huge attention of researchers in last few years due to the coexistence of magnetism and ferroelectricity at room temperature. Its both antiferromagnetic and ferroelectric transition temperatures at well above the room temperature which makes it a more potential candidate for device applications. In device applications, both bulk and thin films studies have great importance. In current research work, BFO materials have been investigated in both forms (bulk and thin films). The work has been divided into three parts: The first part which is very important is based on the successful synthesis of pure BFO phase and rare earth (Ho and Dy) doped BFO ceramic by solid state reaction method; The second part is the fabrication of Ho doped thin films using the pulsed laser deposition technique; In the third and the last part, different types of ions (heavy, paramagnetic, ferromagnetic and diamagnetic) are implanted on pure and Dy doped BFO ceramic. Pure and rare-earth doped (Ho and Dy) BiFeO3 have been prepared by conventional solid state reaction method using Bi2O3, Fe2O3, Ho2O3 and Dy2O3 powders as starting precursor. All oxides have been mixed with an appropriate stoichiometric ratio and then grounded well in acetone medium and calcined. The calcined powder was pressed into pellets of 2.54 cm diameter and 3-4 mm thickness using PVA as a binder with the help of a hydraulic pelletizer at an applied pressure of 98 kPa. Finally, the pellets were sintered at 850 °C for 2 hours. These pellets have been used for the thin films fabrication and are used as a target for ion implantation. The thin films of Bi1-xHoxFeO3 (with x=0, 0.05, 0.10, 0.15 and 0.20) have been successfully grown on Si (100) substrates using pulsed laser deposition and the effect of Ho doping on the crystal structure, dielectric and magnetic properties are studied by X-ray diffraction, field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), X-ray photoemission spectroscopy (XPS), impedance analyzer and Vibrating sample magnetometer (VSM). The structural change and enhanced magnetic properties have been observed after Ho doping in BFO thin films. Ho doped thin films have also shown good dielectric behavior as compared to un-doped BiFeO3. The enhancement of these properties due to Ho doping is discussed along with their relevance in designing multiferroic materials based on Bi1 xHoxFeO3 films for magnetic field sensors, multiple-state memories and spintronic elements. Implantation of diamagnetic (Au+, As+, Ge+), paramagnetic (Y+) and ferromagnetic (Co+) ions induced modification in structural and multiferroic properties of pure phase BiFeO3 (BFO) ceramics. BFO samples are implanted by 500 keV ions of Au+, As+, Ge+, Y+ and Co+ at constant ion fluence 3×1012 ions/cm2. The nuclear and electronic energy losses at 500 keV Au+, As+, Ge+, Y+ and Co+ ions on target BFO have been calculated by software STOPPING RANGE OF IONS IN MATTER (SRIM). Effect of different ions implantation is explained in terms of structural change coupled with amorphization/ recrystallization due to ion implantation probed through XRD, SEM, EDX and XPS. XRD patterns show broad diffuse contributions due to amorphization in implanted samples. The Rietveld refinement results indicate the phase distortion in irradiated samples and phase transition from space group R3c to R3m by the As+ ions implantation, which is revealed by Rietveld refinement. X-ray photoemission spectroscopy was used to identify the chemical bonding, valence band and core levels of implanted BFO samples. The ferroelectric behavior of BFO ceramics varies with different implanted ions which might be understood in terms of oxygen vacancy, the displacement of Fe3+ ions, lattice distortion and lattice phase transition. Room temperature M–H hysteresis measurements reveal that magnetization varied due to the structural distortion and partial destruction of a spin cycloid, which is caused by ion implantation in BiFeO3 ceramics. Furthermore, Y+ ions beam of 500 keV energy irradiated on Bi1-xDyxFeO3 xxi (xDBFO) where (x= 0.00, 0.05, 0.10, 0.15 and 0.20) at a constant fluence 3×1012 ions/cm2 have been investigated. Study of basic crystal parameters using the X-ray diffraction technique of the irradiated samples suggests that all the materials are polycrystalline and indexed in the distorted-perovskite (rhombohedral) structure which was supplemented and supported by Rietveld refinement.The scanning electron micrograph of the compounds showed (i) the uniform distribution of grains on the sample surface with high density and (ii) reduction in grain size on increasing Dy3+ content and Y+ ions irradiation in BiFeO3 (BFO). Ferroelectric and ferromagnetic loops have been observed in the Y+ implanted xDBFO (x=0.00, 0.05, 0.10, 0.15 and 0.20) samples at room temperature which indicate that ferroelectric and ferromagnetic ordering coexist in the ceramics at room temperature. The polarization Ps is increased up to 10.50 μC/cm2 by increasing Dy contents at x=0.15. The Ms value is also enhanced up to 2.329 emu/g by 15% doping of Dy in BFO.